Graco A-XP1 Reactor, 3500psi – 1.5 gal/min – Pneumatic

$15,390.00

The Reactor A-XP1 is a Graco-engineered coatings proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you’re spraying at maximum flow rates – resulting in better quality coating.  For polyurea coatings – applies up to 1.5 gal (5.7 L) per minute.

SKU: 137095 Category:
Manufacturer Part Number: 24Y165

Description

The Reactor A-XP1 is a Graco-engineered coatings proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you’re spraying at maximum flow rates – resulting in better quality coating.

For polyurea coatings – applies up to 1.5 gal (5.7 L) per minute.

  • Maintains temperature setpoints for better yield
  • Maintains consistent output pressure for uniform spray pattern
  • Easy to operate and maintain
  • Best choice for affordability and durability
  • Three Heat Zones
    • Three independent heat zones – ISO, resin and hose heat
    • Provide accurate heat control for reliable spraying to handle different chemical viscosities
    • Digital temperature controls
  • Three Heat Zones
    • Three independent heat zones – ISO, resin and hose heat
    • Provide accurate heat control for reliable spraying to handle different chemical viscosities
    • Digital temperature controls
  • Recirculation Manifold
    • A quick, easy way to balance system pressures
  • NXT® Air Motor
    • Low air consumption for increased efficiency
    • Muffler provides low operating noise levels
    • Air valve provides smooth and rapid changeover
  • ISO Pump Lube System
    • Prevents isocyanate crystallization on the pump seal and shaft
  • Hybrid Heater
    • Provides better temperature control
  • Technical Specifications

    Air Inlet Size (in) 1/2
    Air Inlet Thread Gender Female
    Air Inlet Thread Type NPT
    Amperage (A) 26 @ 380 V ac (3-Phase WYE), 45 @ 230 V ac (3-Phase Delta), 56 @ 230 V ac (1-Phase)
    Application Protective Coatings
    Applicator Type Manual
    Compatible Material Plural Components
    Component A Inlet Size (in) 3/4
    Component A Thread Gender Female
    Component A Thread Type NPT
    Component B Inlet Size (in) 3/4
    Component B Thread Gender Female
    Component B Thread Type NPT
    Component Type Two Component
    Flush Type Solvent
    Frequency (Hz) 50/60
    Includes Proportioner, Heated Hose, Wheels, DataTrak
    Material Application Polyurea
    Maximum Air Consumption (SCFM) 32 scfm at 2000 psi
    Maximum Air Inlet Pressure (psi) 125
    Maximum Flow Rate (GPM) 1.5
    Maximum Flow Rate (cc/min) 5680
    Maximum Fluid Temperature (°F) 190
    Maximum Fluid Viscosity (cP) 1500
    Maximum Hose Length (ft) 210
    Maximum Mix Ratio 1:1
    Maximum Working Pressure (MPa) 24
    Maximum Working Pressure (psi) 3500
    Minimum Fluid Viscosity (cP) 250
    Overall Depth (in) 30
    Overall Height (in) 43.5
    Overall Width (in) 29
    Phase 1, 3
    Power Rating (HP) 17.43
    Power Rating (W) 13000
    Power Rating (kW) 13
    Power Source Air
    Pressure Type High Pressure
    Product Type Plural Component
    Sound Power Level (dB(A)) 80.1
    Sound Pressure Level (dB(A)) 70.2
    Type Proportioning System
    Weight (lb) 310
    Wetted Material Carbon Steel, Stainless Steel, Chrome, Aluminum, Fluoroelastomer, PTFE, Nylon

Additional information

Weight 365 lbs

Reviews

There are no reviews yet.

Be the first to review “Graco A-XP1 Reactor, 3500psi – 1.5 gal/min – Pneumatic”

Your email address will not be published. Required fields are marked *